root/hardware


Mode:

Legend:

Added
Modified
Copied or renamed
Rev Chgset Date Author Log Message
(edit) @1230 [1230] 11/29/07 18:02:25 david updated IP08 install instructions
(edit) @1226 [1226] 11/23/07 02:14:38 david fixed bug with LEDs 1-4, thanks Alex
(edit) @1225 [1225] 11/22/07 20:40:09 david instructions for installing Asterisk on IP08
(edit) @1219 [1219] 11/20/07 17:45:28 david CPLD mods to move nPWR to PF12
(edit) @1217 [1217] 11/19/07 19:03:16 david documented use of eth1 and USB
(edit) @1215 [1215] 11/19/07 03:34:19 david fixed silly bug in CPLD that messed up USB access, USB mounts memory …
(edit) @1208 [1208] 11/18/07 21:10:54 david IP08 boots OK to uClinux root prompt, problem picking up eth1 MAC and USB …
(edit) @1205 [1205] 11/16/07 20:51:34 david first attempt at IP08 CPLD logic, synthesises to JED file OK but could use …
(edit) @1203 [1203] 11/15/07 15:28:11 david prototype IP08 schematic
(edit) @1202 [1202] 11/14/07 19:32:36 david started IP04 CPLD files, plan for IP08 bring up
(edit) @1111 [1111] 10/08/07 22:32:31 david added * conf scripts and expect scripts used for production commissioning …
(edit) @981 [981] 08/20/07 16:55:24 david added latest test results to testplan
(edit) @980 [980] 08/20/07 16:54:32 david removed unused track - thanks Levente
(edit) @843 [843] 06/04/07 05:22:39 david Updated IP04 testplan with latest results
(edit) @817 [817] 05/26/07 01:05:36 david added caveats to BOM spreadsheet
(edit) @812 [812] 05/23/07 16:42:59 david clarified use of ext2 uImage
(edit) @808 [808] 05/23/07 02:18:38 david updated README.Rev642, must orgainsise this a astfin README.IP04 into a …
(edit) @801 [801] 05/22/07 03:38:51 david fixed typos
(edit) @765 [765] 05/16/07 04:15:49 david updated for NAND/yaffs root instructions
(edit) @746 [746] 04/26/07 03:32:39 david updated test plan with todays results
(edit) @745 [745] 04/25/07 05:12:14 david updated for first uClinux tests
(edit) @741 [741] 04/24/07 02:43:38 david NAND being detected and updated doco
(edit) @740 [740] 04/23/07 21:27:52 david updated for Ethernet progress
(edit) @739 [739] 04/23/07 20:20:43 david updated test plan
(edit) @738 [738] 04/23/07 20:01:39 david added README for Rev642 assembly and erratta
(edit) @736 [736] 04/23/07 05:41:22 david some assembly notes, fixed VDDRTC and C117 C120 silskscreen errors
(edit) @722 [722] 04/17/07 22:08:27 blackfin cleanup
(edit) @721 [721] 04/17/07 22:07:58 blackfin 74lv04 added, footprints for 74lv04 and dual mode led need to be created
(edit) @700 [700] 04/14/07 23:43:05 blackfin removed initial version
(edit) @699 [699] 04/14/07 22:40:16 blackfin updated TODO
(edit) @695 [695] 04/14/07 19:26:56 blackfin additional symbols for pr1-appliance
(edit) @694 [694] 04/14/07 19:26:37 blackfin additional footprints for pr1-appliance
(edit) @691 [691] 04/14/07 18:00:39 david added m25p20.sym
(edit) @685 [685] 04/13/07 17:06:58 david due to popular demand, IP04 bom spreadsheet changed back to xls format, …
(edit) @681 [681] 04/11/07 21:48:31 blackfin Programmers Guide
(edit) @669 [669] 04/10/07 21:43:18 david fixed page number
(edit) @668 [668] 04/10/07 18:41:09 blackfin pdf sch up to date
(edit) @657 [657] 04/06/07 15:59:16 david note to clarfity PF2/PF12/nCSB on J5 SPORT connector
(edit) @646 [646] 04/05/07 17:19:43 david removed MMCSDO net after discussions with Dimitar
(edit) @645 [645] 04/05/07 16:35:50 david updated pdfs
(edit) @644 [644] 04/05/07 16:32:22 david updated schematics
(edit) @642 [642] 04/04/07 19:20:30 david DR final checks complete
(edit) @640 [640] 04/04/07 06:47:33 blackfin added gschem-print.scm
(edit) @639 [639] 04/04/07 06:47:24 david change Makefile for transparent background schems
(edit) @638 [638] 04/04/07 06:45:03 david some more pullups and mods to handle SPI arbitration during boot
(edit) @637 [637] 04/03/07 22:46:09 david cpld verilog synthesises OK, added some series terms and pull ups for SPI, …
(edit) @632 [632] 04/03/07 20:09:03 david draft CPLD code
(edit) @629 [629] 04/03/07 05:28:19 david updated PDFs
(edit) @628 [628] 04/03/07 05:25:57 david Routed serial port1 lines to CPLD to allow option of using this port for …
(edit) @627 [627] 04/03/07 02:32:43 david added SO-8 MP25P20 256k byte serial flash in parallel to the larger …
(edit) @625 [625] 04/02/07 21:41:04 david brought TODO up to date, did some clean up work
(edit) @623 [623] 04/01/07 23:54:08 david updated PDFs for SVN rev numbers
(edit) @622 [622] 04/01/07 23:49:19 david changed properties to enable Revision
(edit) @621 [621] 04/01/07 23:34:57 david converted the bom spreadsheet to open office format
(edit) @620 [620] 04/01/07 22:52:09 david added svn revision strings
(edit) @619 [619] 04/01/07 22:42:08 david Makefile for generating PDFs, some more GND plane work on PCB
(edit) @618 [618] 04/01/07 18:17:15 david documented high speed design techniques, replaced some therms with tracks, …
(edit) @617 [617] 04/01/07 06:26:22 david added PCB and sch PDFs
(edit) @616 [616] 04/01/07 04:12:30 david GND nets routed, need top layer GND plane
(edit) @615 [615] 04/01/07 03:38:46 david GND and AGND polys placed, about to connect to GND nets
(edit) @614 [614] 04/01/07 03:19:36 david DRC passes :-), next step GND planes
(edit) @613 [613] 04/01/07 02:36:44 david DRC corrections, board outline
(edit) @612 [612] 03/31/07 22:44:41 david 3V3 routed and silkscreen text aligned in common directions on both sides
(edit) @611 [611] 03/31/07 19:02:31 david all nets routed except power
(edit) @605 [605] 03/31/07 09:27:40 david CPLD routed
(edit) @604 [604] 03/31/07 04:51:19 david LEDs and nCS lines to CPLD routed, working on SPI bus routing
(edit) @603 [603] 03/31/07 02:59:53 david improved ground for TDM bus in 4fxs section, JTAGs routed
(edit) @602 [602] 03/30/07 21:15:38 david CPLD nets partially routed
(edit) @599 [599] 03/30/07 08:04:04 david power supply routed
(edit) @598 [598] 03/30/07 04:21:50 david serial ports routed, abou to start CPLD
(edit) @597 [597] 03/30/07 02:04:24 david really fixed short between GND and 3V3
(edit) @596 [596] 03/30/07 02:02:58 david fixed short between GND and 3V3
(edit) @595 [595] 03/30/07 00:42:05 david all components on PCB, need to change name of nc components to get netlist …
(edit) @594 [594] 03/29/07 21:51:33 david renumbered most componets to match schematic
(edit) @593 [593] 03/29/07 20:35:08 david Ethernet analog side and power supply routed
(edit) @592 [592] 03/29/07 17:31:31 david data bus of Ethernet and NAND flash routed
(edit) @590 [590] 03/29/07 06:48:53 dpenev Penyo improvements, GND plane moved from the solder layer to GND_solder …
(edit) @589 [589] 03/28/07 06:19:03 dpenev DRC errors fixed
(edit) @588 [588] 03/28/07 02:21:42 david updated README and costed BOM spreadsheet
(edit) @587 [587] 03/27/07 20:52:41 david Initial Import fo Four Port IP-PBX
(edit) @586 [586] 03/27/07 19:33:04 blackfin Changed preferences in preparation for DRC
(edit) @585 [585] 03/27/07 17:55:04 blackfin Created dedicated ground plane, ready for discussion
(edit) @584 [584] 03/27/07 11:07:53 dpenev PCB height made 127mm
(edit) @581 [581] 03/26/07 11:36:11 penyo preliminary
(edit) @569 [569] 03/25/07 10:17:19 penyo --
(edit) @568 [568] 03/25/07 10:16:41 penyo --
(edit) @543 [543] 03/23/07 16:23:35 penyo 90%
(edit) @525 [525] 03/21/07 17:02:56 dpenev --
(edit) @524 [524] 03/21/07 17:00:13 dpenev Several components rotated to syncronize with the PCB
(edit) @523 [523] 03/21/07 15:16:49 penyo new footprint for the tantalum cap, and LED
(edit) @522 [522] 03/21/07 15:15:04 penyo buffer + new footprint for the tantalum cap several more components fixed
(edit) @521 [521] 03/21/07 15:14:02 penyo some small fixes around the buffer
(edit) @520 [520] 03/21/07 12:01:49 dpenev new '244 symbol
(edit) @519 [519] 03/21/07 11:55:58 dpenev '244 buffer pins swapped for easy routing
(edit) @506 [506] 03/20/07 15:40:47 penyo 80%
(edit) @505 [505] 03/20/07 14:17:28 penyo 80%
(edit) @504 [504] 03/20/07 13:49:27 penyo 80%
(edit) @503 [503] 03/20/07 12:36:49 penyo 80%
(edit) @490 [490] 03/19/07 14:35:45 penyo --
(edit) @487 [487] 03/18/07 16:40:11 penyo --
Note: See TracRevisionLog for help on using the revision log.